High-Grade Wood Edge Banding Machines at Low Prices from China Factory.

Intelligent control

Standard PLC microcomputer control, using the principle of time control, greatly increases stability and safety.

Narrowversion auxiliary

Auxiliary narrow plate feeding

Pre milling device

Using diamond double pre milling cutters to further modify the ripple marks, burrs and edges caused by the sawing process of the cutting board, in order to achieve better edge sealing effect.

Separation device

Spray a separating agent on the board that needs to be pre milled, forming an isolation layer on both sides of the board to prevent dust from sticking to the board after pre milling and making it difficult to clean.

Baking lamp device*2

The preheating device of the baking lamp heats the edges of the board to prevent the temperature of the board edges from being too low in colder environments, and the glue used for coating from cooling too quickly, resulting in incomplete and weak edge sealing.

PUR/EVA glue pot+quick sol box

The rapid sol-gel glue pot can automatically and quickly replenish hot sol particles. The glue coating device heats the hot sol through the glue pot and uses a spiral structure to evenly apply glue, with a strong adhesive force and an automatic cleaning device.

Honeycomb aluminum plate

Support honeycomb aluminum plate for edge sealing, with uniform force distribution, no damage to the plate, and a tight and seamless connection during pressing.

Double guide rail flush

The head alignment adopts dual guide rails, with dual motors working separately, resulting in high efficiency and fast edge sealing speed.

Manual finishing

In order to prevent the breakage of veneer during sealing, it can also be used as the first leveling process for PVC and acrylic edge sealing, reducing the cutting force and wear of precision cutting tools.

Pneumatic fnishing

高速斜切电机，免调节操作更加便捷，合金圆盘保证修边平整圆滑导轨款结构，修边更精准、稳定。

Four motor profiling tracking

The contour tracking and rounding device can make the end face of the board smoother and more beautiful.

Edge scraping device

Used to eliminate ripple marks caused by non-linear cutting processes during edge trimming, making the upper and lower parts of the edge material smoother and neater, and forming a guide rail structure

Structure and trimming are more precise and stable.

Wire breaking device

Cut off the excess edge trimming chips to prevent them from rolling onto the polishing wheel.

Flexible scraping device

After scraping the edges of the board, it is flattened and trimmed again for better results

Cleaning device

Remove excess glue from the edge of the board after sealing, in order to make the edge sealing effect of the board more beautiful.

Double polishing device

Through 4 rounds of polishing, the edge sealing section is made smoother and the effect is better.